Nicotinic acid as a nontoxic corrosion inhibitor for hot dipped Zn and Zn-Al alloy coatings on steels in diluted hydrochloric acid

The inhibition effect of nicotinic acid for corrosion of hot dipped Zn and Zn-Al alloy coatings in diluted hydrochloric acid was investigated using quantum chemistry analysis, weight loss test, electrochemical measurement, and scanning electronic microscope (SEM) analysis. Quantum chemistry calculation results showed that nicotinic acid possessed planar structure with a number of active centers, and the populations of the Mulliken charge, the highest occupied molecular orbital (HOMO), and the lowest unoccupied molecular orbital (LUMO) were found mainly focused around oxygen and nitrogen atoms, and the cyclic of the benzene as well. The results of weight loss test and electrochemical measurement indicated that inhibition efficiency (IE%) increased with inhibitor concentration, and the highest inhibition efficiency was up to 96.7%. The corrosion inhibition of these coatings was discussed in terms of blocking the electrode reaction by adsorption of the molecules at the active centers on the electrode surface. It was found that the adsorption of nicotinic acid on coating surface followed Langmuir adsorption isotherm with single molecular layer, and nicotinic acid adsorbed on the coating surface probably by chemisorption. Nicotinic acid, therefore, can act as a good nontoxic corrosion inhibitor for hot dipped Zn and Zn-Al alloy coatings in diluted hydrochloric acid solution. (c) 2007 Elsevier Ltd. All rights reserved.

Concentration monitoring and performance of a migratory corrosion inhibitor in steel-reinforced concrete

Inhibitor concentration depth profiles for concrete samples treated with a proprietary migratory corrosion inhibitor (of the Cortec MCI range) are presented. The treated concrete was cored and these cores were then sectioned and crushed before being immersed in distilled water to extract the available inhibitor. The amine concentrations were quantified using an ammonium-sensing electrode and were then related to the inhibitor concentration present. The inhibitor examined, reported to contain a combination of volatile amines and amino carboxylate compounds, was found to readily diffuse through concrete. The inhibitor was subjected to a 5-year trial and found to be effective in suppressing corrosion of steel reinforcement in the presence of high chloride concentrations. The concentration profiles indicate that only relatively low concentrations of inhibitor were required to achieve inhibition in this case.

Electrochemical methods applied in innovative corrosion inhibitor experiments : case studies

Electrochemical methods can be used more effectively if innovative experiments are designed and employed. This is especially true if a corrosion system to be tested involves inhibitors that could change the mechanism and pattern of corrosion in complex ways. This paper discusses corrosion inhibitor test design using several practical cases as examples. Particular attention is on difficult issues such as the simulation of localized corrosion phenomena and the influence of corrosion mechanism on inhibitor test results. ©2012 by NACE International.

An overview of localised corrosion inhibitor evaluation

The use of corrosion inhibitors is a flexible and economical option for localised corro-sion control. Unfortunately some high performance traditional inhibitors are toxic or environmentally unacceptable. Various new approaches of designing environmentally friendly “greener” inhibitors have been reported in the literature; however the perfor-mance of inhibitors in preventing localised forms of corrosion are often not sufficiently evaluated. An obstacle in new inhibitor evaluation is technological difficulties associ-ated with the assessment of localised corrosion. It is a challenging task to design effective experiments that are able to assess not only the tendency, but also the rates and the distribution of localised corrosion. This paper provides an overview of some recent progress in methodologies for evaluating localised corrosion inhibitors.